23Sep/17

MONO PUMP Introduction

pump

HAINA Stay focused on mono pump product innovation and development，To improve the quality of products,Improve the product after-sales service, we maintain close ties with the customers.Sincerity is our principle, positive forward, innovation spirit, after years of efforts, make HAINA product sales to the petroleum, chemical, electric power, papermaking, environmental protection, metallurgy, coal, food, pharmaceutical, drainage works and other industries. Haina pumps mono pump it’s a volume pump，The pump speed can be changed by means of coupling and pump connection, or belt, gear box, speed regulating motor, etc.Flow: 0.8-150m3/ h, pressure 0.4-1.2 MPa. Haina mono pump compare with other pumps advantage Structure and work characteristics；Compared with asphalt pump, centrifugal pump, vane pump and gear pump have the following advantages： mono pump can deliver high viscosity liquid，The flow is uniform, the pressure is stable, the low speed is more obvious. The flow rate is proportional to the speed of the pump, so it has good variable adjustment. mono pump can deliver different viscosity liquid， mono pump installation position can be tilted arbitrarily. mono pump small size, light weight, low noise, simple structure and convenient maintenance.haina mono pump Use non-toxic, tasteless rubber，Working temperature 120℃.

16Aug/17

kcb-83.3 gear pump (2CY5/0.33 gear pump)

type, , ,

KCB-83.3 gear pump （2cy5/0.33 gear pump) Traffic:5 m3/h pressure: 0.33 MPA, pump in and out of diameter: 1.5 inch threaded connections. Motor power: 2.2 KW, the motor can be divided into ordinary and explosion-proof motor, conventional is 380v/50 hz, if there is any change, please notice. KCB83.3 gear pump material: cast iron, copper, alloy steel, stainless steel. If you are interested in KCB83.3 the gear pump, please call my company sales. Straight through the pump and motor coupling, motor speed is 1420 RPM, if carrying liquid viscosity can match or deceleration motor frequency conversion motor, here are some pictures for your reference. Alloy steel material about 5 times than ordinary steel long service life, the biggest characteristic is wear-resisting, long service life, widely used in conveying the impurities have certain lubrication oil.

16Aug/17

Kcb-55 Gear Pump

type, ,

KCB-55 gear pump is also called: 2cy3.3/0.33, the gear pump flow: 3.3 cubic meters per hour, KCB 55 represents 55l/min, pressure is 0.33 MPA, in and out of the diameter 1 inch (25 mm) threaded connection, the motor power: 1.5 KW Motor and pump straight league, two points, general motors and explosion-proof motor.(380 v / 50 hz other motor to be customized) Pump material: cast iron, copper, alloy steel, stainless steel KCB 55 gear pump seal way into packing seal and mechanical seal, the customer when ordering should mark, best to provide the information such as the temperature at the same time.

16Aug/17

KCB 33.3 Gear Pump

type, ,

KCB-33.3 gear pump (also often called 2 cy1.1/1.45) 2m3/h, pressure is 1.45 MPA, pump in and out of diameter: 3/4 “experiment medium: oil. Material: cast iron, copper, alloy steel, stainless steel KCB 33.3 pump can with conventional motor and explosion-proof motor (normal equipped with 2.2 KW – 4 p, 1420 r/min, if you have any special request when you order it should mark).

16Aug/17

KCB 18.3 Gear Pump

type, ,

KCB – 18.3 to 18.3 litres per minute gear pump flow, pressure is 1.45 MPA, 1.5 KW – 4 motor, speed 1450 RPM.Buy KCB 18.3 gear pump, KCB18.3 pump please contact us KCB18.3 gear pump made of cast iron and stainless steel, two kinds.According to different working condition choose different material KCB gear pump is very important, working condition including temperature, acid and alkali liquid, the liquid viscosity, lubricity, etc, Motor, KCB-18.3 gear pump can match 1.5 KW – 4 common motor or explosion-proof motor.You can also change the motor speed to reduce the traffic. KCB – 18.3 gear pump parameters are as follows: Traffic: 18.3 L/min Outlet pressure: 1.45 MPA The motor power: 1.5 KW Base for cast iron base. In and out of the diameter: 3/4 inch (threaded connections)